AVAILABLE NOW: The New E313 Series Automatic Transfer Switch

Back to Product Listings

E313 Series Single Bypass Isolation ATS (100-200A)

The E313 series ATS is built using the ABB OTM motorized automatic transfer switch; the OTM ATS is built for standard applications requiring the dependability and ease of operation found in a motorized contactor switch. The E313 has a 74% smaller footprint than the E301 Series model equivalent, making it perfect for retrofits, smaller spaces and easier transportation.
  • Designed for emergency and standby applications
  • Double throw, mechanically interlocked contactor mechanism
  • Single sided bypass isolation on emergency
  • Voltages from 208 to 600V; 1-Phase and 3-Phase; 2 and 3 poles, see Model Configurations tab
  • Ratings 100 to 200 amps, see Model Configurations tab
  • Higher 100kA rating option
  • Bright front panel mounted pilot LEDs for bypass in S2 (emergency) and ATS Isolated
  • Optional: built in metering: Voltage, Frequency, Current, Power Factor
  • Front mounted manual push button switch (password protected)
  • Front mounted test switch (load/no load) to simulate Source 1 (normal) failure — automatically bypassed should the Source 2 (emergency) fail (password protected)
  • Centralized termination point for ease of installation that includes contacts for:
      • Elevator pre/post signal
      • Engine start
      • Not in Auto
      • ATS in Bypass
      • ATS in Position 1
      • ATS in Position 2
  • CSA/EEMAC/NEMA Certified Type 1 enclosures— other ratings available (3R/4)

Series  Amperage  Poles  Voltage  Standard/Fused WCR 
E313 

Automatic Transfer Switch

Single-Sided Bypass/Isolation 

 100A 

150A 

200A 

 2, 3  A = 600V 

B = 208V 

C = 240V 

D = 416V 

E = 480V 

 Standard: 10kA 

Fused: 100kA 

NAVIGATION

CONTACT US

Phone: 905-271-6271

Email: eepinfo@eepltd.com